Assortment of three · 105 in
POWERTEC 13625 assortment, 105 in, 3 blades
The riser-block length, with every thickness published — and the one assortment here that leaves out the fine blade.
Specifications
- Length
- 105 in, published — 2,667 mm (105 in)
- Width
- Three: 1/2 in (12.7 mm), 3/8 in (9.5 mm) and 1/4 in (6.4 mm)
- Thickness
- 0.025 in on all three, published — 0.635 mm (0.03 in)
- Pitch
- 6 TPI on the 1/2 in and the 1/4 in; 4 TPI on the 3/8 in · No blade finer than 6 TPI is included
- Tooth form
- Regular teeth on both the 4 TPI and the 6 TPI, stated
- Steel
- High grade carbon steel, stated flexible with a hard edge, with a heat-resistant weld
- Quantity
- 3 blades
- Intended machine
- A Delta 14 in band saw fitted with a riser block, named by the maker
- Part number
- 13625
- Amazon reference
- B0D3DV2JNN
- EAN
- 0843441135067
Every figure below names its source. Each one is a manufacturer
specification read off the listing itself. The judgments are ours.
The riser-block length
A riser block bolts between the two halves of a 14 inch saw’s frame, raises the
top wheel, and roughly doubles the depth of cut — about 150 mm (5.91 in) to about 300.
The wheels move apart, so the band grows: 105 inches instead of 93-1/2. Nothing
else about the saw changes.
Which is why this set is the same three widths as the 93-1/2 inch one. What
changes is the work, and the 3/8 inch at 4 TPI here is the blade for a deep
resaw.
And the fine blade is gone
The 93-1/2 inch assortment from this maker includes a 1/8 inch at 14 TPI. This
one replaces it with the 3/8 inch at 4 TPI.
The reasoning is defensible: a saw set up for depth is not a saw set up for
scrolling, and a 1/8 inch band on a tall column runs a long way between guides.
The consequence is not. The finest pitch in this pack is 6 TPI, and thin stock
will tear under it.
Nought point nought two five
Published on all three blades, which two of this maker’s four listings on this
shelf do not manage.
It is the normal thickness for this class, and at 105 inches it earns its
mention: a longer band passes the wheels more times per minute for the same cut,
and every pass works the weld.
The AYAO blade on this shelf publishes 0.018 in — a different proposition, at a
different tension.
Length first, everything else second
A band saw blade is a closed loop, and the loop has one length.
Too short and it will not reach round both wheels. Too long and the tension
spring runs out of travel before the band is tight. There is no adjustment and
no adapter: the number stamped on the saw is the number to buy.
Every listing on this shelf says so in its own words, and three of them say it
twice. It is the only compatibility question that cannot be worked around.
Availability
Read on the day this page was built: $40 at the American Amazon shop.
Read from Keepa on the day this page was last revised; stock and price both move without notice.
Prices quoted in this text were read on 2026-10-07. The live price is at the top of the page.
