Skip to content

Hand-tool hose · 8 fittings

Peachtree Woodworking Supply Fulton 11714 hose kit, 10 ft, 8 fittings

A hand-tool hose with eight adapters, three of them stretchable — and the only listing here that publishes a fit warning.

Fulton 11714 power tool hose kit with eight adapter fittings, product photograph

Peachtree Woodworking Supply Fulton 11714 hose kit, 10 ft, 8 fittings

A hand-tool hose with eight adapters, three of them stretchable — and the only listing here that publishes a fit warning.

Hose
10 ft long, 1-3/16 in outer diameter — 3.05 m (10 ft) × 30 mm (1.18 in), stated puncture resistant
Fittings
Eight: 2 small rubber thread-on, 2 ribbed rubber adaptors, 1 plug-in shop vacuum adaptor and 3 Sili Flex fittings · The eight are enumerated and the count agrees
Silicone ends
Stretchable silicone, stated to adapt to different dust ports — the only stretch fitting on this shelf
Named tools
Orbital sanders and biscuit joiners, stated
Fit warning
Stated: shop vacuum port sizes vary by manufacturer, and the images and dimensions should be reviewed carefully — the only fit warning published on this shelf
Quantity
1 hose and 8 fittings
Part number
11714
Amazon reference
B0FPNH1XWK
EAN
0817918025298
  • Enumerates all eight fittings, and the count agrees with the total
  • Stretchable silicone ends, which is the only real answer to a non-standard port
  • Thirty millimeters of hose will not serve a machine port

Best for: A random orbital sander and a biscuit joiner on a shop vacuum, where no two ports are the same size

≈ $32
Check price on Amazon

Specifications

Hose
10 ft long, 1-3/16 in outer diameter — 3.05 m (10 ft) × 30 mm (1.18 in), stated puncture resistant
Fittings
Eight: 2 small rubber thread-on, 2 ribbed rubber adaptors, 1 plug-in shop vacuum adaptor and 3 Sili Flex fittings · The eight are enumerated and the count agrees
Silicone ends
Stretchable silicone, stated to adapt to different dust ports — the only stretch fitting on this shelf
Named tools
Orbital sanders and biscuit joiners, stated
Fit warning
Stated: shop vacuum port sizes vary by manufacturer, and the images and dimensions should be reviewed carefully — the only fit warning published on this shelf
Quantity
1 hose and 8 fittings
Part number
11714
Amazon reference
B0FPNH1XWK
EAN
0817918025298

Every figure below names its source. Each one is a manufacturer specification read off the listing itself. The judgments are ours.

Eight fittings, enumerated

Two small rubber thread-on. Two ribbed rubber adaptors. One plug-in shop vacuum adaptor. Three Sili Flex fittings.

That is eight, and the listing says eight. A set whose contents add up is worth remarking on — the abrasives shelf in this catalog has a sixteen-piece assortment whose four grades are never split.

Three of them stretch

Which is the only real answer to the problem this shelf is named for.

Hand-tool dust ports are not standardized in any way. Every sander, every track saw, every biscuit joiner has its own spigot, and a rigid adapter fits one of them or none.

A silicone cuff stretches over a range, so one fitting covers several tools.

What silicone does is perish, tear and take a set after a winter in a cold shop. An ABS adapter from the POWERTEC fittings on this shelf outlives the tool.

A fit warning, as a feature

Stated: shop vacuum port sizes vary by manufacturer, and the images and dimensions should be reviewed carefully.

No other listing on either half of this shelf admits the problem, and the shelf’s own intro is named for it.

It is the opposite of the POWERTEC approach, which publishes every diameter to the sixty-fourth and lets the reader decide. Both are honest. Only one of them needs the photographs.

Thirty millimeters

One and three sixteenths of an inch, outside.

That is a hand-tool size, and correctly so: a sander makes fine dust at low volume, and a shop vacuum through 30 mm (1.18 in) is well matched to it.

For a machine it is nothing. A table saw or a planer wants four inches, and the extraction pages in this catalog set out what happens when 30 mm (1.18 in) is asked to do that job.

What is missing is the internal diameter, which is the figure the airflow actually follows.

Availability

Read on the day this page was built: $32 at the American Amazon shop.

Read from Keepa on the day this page was last revised; stock and price both move without notice.

Prices quoted in this text were read on 2026-10-07. The live price is at the top of the page.

What comes up most often

What do stretchable silicone ends solve?

The problem the whole shelf is named for. Hand-tool dust ports are not standardized at all — every sander, every track saw and every biscuit joiner has its own spigot, and a rigid adapter either fits one of them or none. A silicone cuff stretches over a range, so a single fitting covers several tools. The trade is that silicone perishes, tears and takes a set after a year in a cold shop, where an ABS adapter from the POWERTEC fittings on this shelf will outlive the tool. Three of the eight fittings here are the flexible kind.

Why publish a fit warning?

Because the alternative is a return. The listing states that shop vacuum port sizes vary by manufacturer and asks the buyer to check the images and dimensions — which is both true and unusual: the shelf's own intro names the adaptors that never quite fit, and no other listing on either half of this shelf admits to the problem. It is the opposite of the POWERTEC approach, which is to publish every diameter to the sixty-fourth of an inch and let the reader decide. Both are honest; only one needs no images.

Is 1-3/16 inch big enough?

For hand tools, yes. Thirty millimeters is the size a sander port is, and a sander produces fine dust at low volume — the airflow a shop vacuum gives through 30 mm (1.18 in) is well matched to it. For a machine it is nowhere near: a table saw or a planer wants four inches, and the published dust-extraction pages in this catalog set out what happens when a 30 mm (1.18 in) hose is asked to do it. What is missing from this page is the internal diameter, which is the figure the airflow actually depends on.

More extraction fittings

  • Fulton four inch blast gates, six pack, product photograph

    Fulton Woodworking Tools 12109 blast gates, 4 in, 6 pack

    Six gates, which is how many a ducted shop needs — and a published stop, which is the complaint the shelf already had.

    Diameter
    4 in nominal · No actual diameters are published
    Ports
    Tapered on both sides, stated so hoses slip on and can be clamped, and stated to accept some tapered fittings
    Gate
    A sliding gate with a built-in stop, stated so it will not slide out when fully opened — the only stop published on this shelf
    Function
    Stated as a shut-off valve: closed, air does not flow; open, dust is collected · Stated that one gate per machine concentrates airflow on the machine in use
    Material
    ABS
    Quantity
    6 gates
    Not supplied
    Hoses and hose clamps, both stated sold separately
    Part number
    12109
    Amazon reference
    B0BG8X6NPN
    EAN
    0817918023386
    • Six gates, which is one per machine in a real workshop
    • A built-in stop, which answers the complaint the published single gate on this shelf records
    • No actual diameters published, only nominal four inches

    Best for: A workshop with fixed four-inch ducting to several machines — one gate at each

    ≈ $30
    Check price on Amazon
  • Transparent 100 mm dust extraction hose, product photograph

    Miko Ø 100 mm extraction hose, 2.5 m

    The hose is what limits most extraction systems, not the machine. Getting the diameter right matters more than getting the extractor right.

    Diameter
    100 mm (3.94 in)
    Length
    2.5 m (8 ft)
    Wall
    Transparent
    Amazon reference
    B07Y3Q9TPB (identical on 3 markets)
    EAN
    4260289832471
    • 100 mm (3.94 in) matches the ports on planers, table saws and band saws
    • Transparent, so a blockage is visible instead of guessed at
    • Not sold in Britain, France or the United States

    Best for: Connecting a chip collector to a 100 mm (3.94 in) machine port

    Search Amazon for this model
  • POWERTEC 70123V dust hose connector, product photograph

    POWERTEC 70123V hose connector

    The part that makes two short hoses into one long one — tapered at both ends so it goes in without a fight.

    Nominal size
    4 in, both ends
    Diameters
    3-31/32 in outer and 3-11/16 in inner — 100.8 and 93.7 mm (3.69 in), stated to accommodate all 4 in ID hoses
    Function
    A secure quick connection between two 4 in ID dust hoses, stated to extend the reach of a standard set-up
    Form
    Tapered ports at each end, with a raised middle section stated for easier assembly and grip
    Material
    ABS, stated for abrasion resistance and tensile strength
    Quantity
    1 connector
    Part number
    70123V
    Amazon reference
    B09VXHYDV1
    EAN
    0843441114000
    • Publishes both diameters, which the European half of this shelf does not
    • Tapered at both ends, so a cold hose goes on without heating it
    • Joins hose to hose only — it will not fit a machine port

    Best for: Extending a four-inch hose, or repairing one that has split in the middle

    ≈ $10
    Check price on Amazon

Elsewhere in the workroom

  • Hurricane eight piece HSS wood turning tool set with hardwood handles, product photograph

    HURRICANE 02-170, 8-piece M2 HSS set

    The only hardness figure on either half of this shelf that belongs to its own scale — 56 to 63 HRC, for high-speed steel.

    Contents
    Eight, each named and sized: a 1/2 in bowl gouge, a 7/8 in roughing gouge, a 3/4 in spindle gouge, a 1 in and a 5/8 in skew chisel, a 3/16 in parting tool and a 5/8 in scraper
    Steel
    M2 high-speed steel
    Hardness
    HRC 56 to 63, published — the only hardness on this shelf stated on a scale that fits the material
    Handles
    10 in solid hardwood, stated to dampen vibration, with brass ferrules reinforcing the blade joint
    Overall length
    16.3 in — 414 mm
    Edge
    A ready-to-use factory edge, stated
    Case
    A wooden box with a dedicated slot per chisel
    Part number
    02-170
    Amazon reference
    B0CZ374D83
    EAN
    0810034074591
    • Every one of the eight tools is named and sized
    • Publishes a hardness range, and it is the right scale for high-speed steel
    • Needs a grinder and a jig, neither of which is on this shelf

    Best for: A first full set of traditional tools, for somebody who intends to learn to sharpen

    ≈ $75
    Check price on Amazon
  • HZ 82 mm tungsten carbide planer blades, ten pack, product photograph

    HZ 82T, 82 × 5.5 × 1.2 mm TCT, 10 pack

    Exactly the section of the published HSS blades on this shelf, in tungsten carbide instead — a direct substitution.

    Length
    82 mm (3.23 in) — 3-1/4 in
    Width
    5.5 mm (0.22 in)
    Thickness
    1.2 mm (0.05 in) · The published HSS blades on this shelf are 82 × 5.5 × 1.2 mm (3.23 × 0.22 × 0.05 in) — the same section
    Material
    TCT tungsten carbide
    Type
    Reversible, stated to double the lifespan of each blade
    Claims
    Stated to last up to 30 per cent longer and to be 10 per cent sharper than standard tungsten carbide blades · The FOXBC blades on this shelf publish the same two percentages, word for word, and neither names the standard it compares with
    Quantity
    10 blades, in a plastic case
    Fits
    Makita, Bosch, DeWalt, Black & Decker, Ryobi and other 3-1/4 in hand planers
    Part number
    82T
    Amazon reference
    B07F63DVZV
    EAN
    0703931966079
    • Publishes all three dimensions, and they match the published HSS set here exactly
    • Carbide holds an edge far longer than HSS on abrasive or painted stock
    • The 30 and 10 per cent claims name no standard to compare against

    Best for: A hand-held electric planer on painted or reclaimed stock, where HSS blunts in a meter

    ≈ $27
    Check price on Amazon
  • IMOTECHOM eight piece HSS wood turning tool set with teak handles, product photograph

    IMOTECHOM MTA0001A, 8-piece HSS set

    The only listing on this shelf to publish a blade length — six point three inches, which is how much tool there is to regrind.

    Contents
    Eight, each named and sized: a 1 in and a 7/8 in roughing gouge, a 5/16 in spindle gouge, a 1 in and a 5/8 in skew chisel, a 5/8 in spear scraper, a 5/8 in round nose scraper and a 5/8 in parting tool
    Steel
    High-speed steel, stated to outlast high carbon steel · No grade and no hardness published
    Blade length
    6.3 in — 160 mm, published, the only blade length on either half of this shelf
    Handles
    10 in teak, stated harder and comfortable
    Edge
    Accurately pre-sharpened by machine, stated for all the tools
    Case
    A wooden case with double-layer panels, an enlarged structure and a thickened hinge, shipped in a mail box with EPE protection
    Part number
    MTA0001A
    Amazon reference
    B07RN4G83B
    EAN
    6971620540389
    • Publishes the blade length, which is how much tool there is to grind away
    • All eight tools named and sized
    • No steel grade and no hardness, where the Hurricane set here publishes both

    Best for: Spindle work and scraping, by somebody who will add a bowl gouge separately

    ≈ $160
    Check price on Amazon

All extraction fittings