Edges, joints & profiles · review
A €90 router sold with three bases and three collets — and with a placeholder where the part number should be.
The end of it A lot of kit for €90 and no way to order a spare part for it. Fine as a second router, risky as your only one.
Every figure is a manufacturer specification, read off the listing itself, and the judgments are ours — drawn from how the specification behaves in this class of machine and from what long-term owners consistently report. Where a figure is missing, we say so rather than fill it in.
710 W, 220 V, an aluminum body, a soft grip, a built-in dust extraction port, a rocker on/off switch and selectable speed. Rack-and-pinion depth adjustment to a maximum of about 20 mm (0.79 in), with a quick-release. A spindle lock for cutter changes and a flat top so the tool stands stable while you change them. In the box: three bases — trimmer, plunge and tilting — three collets in 6, 8 and 10 mm (0.39 in), wrenches and guides.
A collet is not a chuck. It grips the shank along its whole length and it is machined for one diameter, so a cutter that is nearly the right size is a cutter that will creep out of the tool under load. Cutters are sold in 6 mm, 8 mm (0.31 in) and 1/4 inch, and on the bigger machines in 12 mm and 1/2 inch, and those sizes are not interchangeable however close two of the numbers look.
Read the collet off the machine before spending anything on a cutter set, and buy reducers from the tool maker rather than from the cheapest listing. This is the one accessory where the fit is the entire function.
Three collets covering 6, 8 and 10 mm (0.39 in) is more than most routers offer at any price, and it is the reason to take this listing seriously.
Where the manufacturer part number should be, the listing carries “localization-B07J67PNQX” — the Amazon reference with a prefix, not a number KATSU issued. That is a small thing that predicts a larger one: when a collet wears or a base cracks, there is no catalog number to quote and no obvious route to a spare.
Treat it as a consumable tool. At €90 that arithmetic can still work.
Prices quoted in this text were read on 2026-08-12. The live price is at the top of the page.
| Motor | 710 W |
|---|---|
| Supply | 220 V |
| Collets | 6 mm (0.24 in), 8 mm (0.31 in) and 10 mm (0.39 in) |
| Bases | Trimmer, plunge and tilting |
| Maximum depth | About 20 mm (0.79 in), rack-and-pinion adjustment |
| Body | Aluminum |
| Part number | Not published — the field reads "localization-B07J67PNQX" |
| Amazon reference | B07J67PNQX (identical on 5 markets) |
| EAN | 5060524762315 |
Because it is what you quote when something needs replacing — a collet, a base, a brush set. The field on this listing reads "localization-" followed by the Amazon reference, which is a placeholder rather than a manufacturer number. It tells you something about how the product is supported.
Yes, and unusually so at this price. 6 mm (0.24 in) and 8 mm (0.31 in) cover most of the European cutter market and 10 mm (0.39 in) covers some larger profiles, and having all three means a cutter set bought later is very unlikely to be the wrong shank. It is the strongest thing on this listing.
It rules out through-cuts in anything but thin stock and it rules out deep housings. For rounding over, chamfering, trimming and shallow grooves — which is what a tool at this price is bought for — it is enough.
A listing is not an offer: the reference exists on these stores, availability changes daily.
7.5/ 10
A lot of kit for €90 and no way to order a spare part for it. Fine as a second router, risky as your only one.
Occasional edge and trim work where a broken tool is an annoyance, not a crisis
Specifications: the manufacturer sheet for woodworking machines and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
12 V · brushless · 8 mm (0.31 in) collet · bare tool
A one-handed 12 V edge router at €140 that publishes the one number that matters on a trimmer — the collet size.
Best for: Rounding over, trimming laminate edges and chamfering, one-handed, on site
Professional plunge · fine-adjust fence
A professional plunge router that ships with the parallel fence, the template guide adapter and the wrench — the parts usually sold separately.
Best for: A workshop that wants a professional router working properly on day one
18 V cordless · plunge or trim base · brushless
The cordless router, in both bases, with a brushless motor — and a genuinely different tool from every mains machine on this page.
Best for: Edge trimming, hinge recesses and template work, especially away from a bench
≈ $790
