Belt, disc, spindle & drum · review
A 650 W compact oscillating spindle sander — more motor than the Scheppach, in a smaller footprint, at €148.
The end of it The stronger motor of the two European spindle sanders here, on a listing that tells you less.
Every figure is a manufacturer specification, read off the listing itself, and the judgments are ours — drawn from how the specification behaves in this class of machine and from what long-term owners consistently report. Where a figure is missing, we say so rather than fill it in.
650 W, compact oscillating spindle sander, part number 949538. The listing does not itemize the drums, sleeves or table inserts supplied.
More motor, smaller footprint, €12 cheaper in Germany — and an unknown accessory complement against Scheppach’s stated six sleeves, six drums and matching inserts.
That is the trade in a sentence. If the Triton ships with a full set it is the better machine; if it ships with one drum, the difference in price disappears into the first accessory order. Ask before ordering.
Each grit removes the scratches of the one before it. Skip a step — 80 straight to 180 — and the 180 paper polishes the 80-grit scratches instead of removing them. They are invisible on bare timber and obvious the moment a finish goes on, under a raking light, at which point the only fix is to start again at 80.
The progression costs one extra sheet. The mistake costs the panel.
Catalogued and unsold: the American Amazon shop lists the reference with nobody behind it.
Read from Keepa on the day this page was last revised; stock and price both move without notice.
Prices quoted in this text were read on 2026-08-12. The live price is at the top of the page.
| Motor | 650 W |
|---|---|
| Type | Compact oscillating spindle sander |
| Part number | 949538 |
| Amazon reference | B077PVTF7Q (identical on 6 markets) |
| EAN | 5024763165214 |
It helps on hardwood and on aggressive grits, where a small motor slows under pressure and the sleeve starts to burnish rather than cut. On softwood and fine grits neither machine is working hard. Treat it as headroom rather than as a decisive advantage.
The listing does not say, and that is the question to ask the seller. Sleeve sizes and matching table inserts are what make a spindle sander usable across a range of curves; a machine supplied with one drum needs an accessory purchase before it does the job.
A listing is not an offer: the reference exists on these stores, availability changes daily.
7.5/ 10
The stronger motor of the two European spindle sanders here, on a listing that tells you less.
The same job as the Scheppach, with more power and less bench
Specifications: the manufacturer sheet for woodworking machines and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
12 V · Ø 125 mm (4.92 in) · L-BOXX 136 · no price, no barcode
A bundle we cannot price, cannot verify and cannot find in any market but one — which is the whole review.
Best for: Nobody, until the listing carries a price and a barcode
5 in pad · 3 A · 8,000–12,000 OPM · counterweight · dust-sealed switch
The only random orbit sander on either half of this shelf with a price on its listing — and it publishes an orbit range.
Best for: Finishing a surface before a finish goes on it, with a DEWALT extractor already in the shop
≈ $79
Belt and disc · bench · €111
The cheapest belt-and-disc combination here, and the machine that stops you sanding curves by hand.
Best for: Sanding to a line on small parts, where hand sanding is slow and imprecise
≈ $360
