Biscuits, dominos & dowels · review
The professional biscuit jointer that publishes its cutting depth and ships with the cutter and a dust bag.
The end of it The best-specified jointer here, and the one that costs the most to be so.
Every figure is a manufacturer specification, read off the listing itself, and the judgments are ours — drawn from how the specification behaves in this class of machine and from what long-term owners consistently report. Where a figure is missing, we say so rather than fill it in.
22 mm (0.87 in) maximum cutting depth, supplied with a 105 × 22 mm (4.13 × 0.87 in) cutter, a dust bag and a two-pin wrench. Part number 0601620070.
Three biscuit jointers on this page, and only this one states the number that defines what it can do. That is worth something on its own: a specification a manufacturer prints is one it can be held to.
Treat it as packaging rather than as extraction. The port it attaches to is the useful part — connect it to a workshop vacuum and the machine becomes far cleaner to use. See the extraction reviews above for which kind of vacuum suits a narrow port.
No such listing: the American Amazon shop answers the reference with a search box rather than a page.
Read from Keepa on the day this page was last revised; stock and price both move without notice.
| Maximum cutting depth | 22 mm (0.87 in) |
|---|---|
| Supplied cutter | 105 × 22 mm (4.13 × 0.87 in) |
| Supplied with | Dust bag, two-pin wrench |
| Part number | 0601620070 |
| Amazon reference | B00531AMEK (identical on 5 markets) |
| EAN | 3165140619288 |
It sets the largest biscuit size the machine can seat, and therefore the thickest stock it can align well. Standard biscuits run to size 20; a machine that reaches 22 mm (0.87 in) of depth handles the whole standard range with margin. It is the specification that separates a jointer from a slot cutter with a fence.
For occasional cuts, it stops chips filling your shoes. For anything sustained, connect the port to a workshop vacuum instead — a bag on the tool fills fast and does nothing about the fine fraction, which is the part worth capturing.
A listing is not an offer: the reference exists on these stores, availability changes daily.
8.7/ 10
The best-specified jointer here, and the one that costs the most to be so.
A professional workshop where the jointer is used weekly rather than occasionally
Specifications: the manufacturer sheet for woodworking machines and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
Pocket-hole jig · Easy-Set bit · case · cheapest in Britain
The pocket-hole jig most people mean when they say Kreg — sold in five European markets and, oddly, not in America.
Best for: Repairs, shop furniture and carcase work where speed beats invisibility
Pocket hole jig · with bit and screws
The joint that needs no clamps and no glue-up time — and the one that shows on one face forever.
Best for: Carcases, jigs, shop furniture and anything where one face is never seen
3 to 12 mm (0.12 to 0.47 in) bushes · 150 dowels · 3 drills · €19
A €19 dowelling jig with 150 dowels and three drill bits in the box — and a different brand on it than the one we searched for.
Best for: Occasional dowelled carcase work and repairs, and accurate freehand drilling
≈ $63
Prices quoted in these summaries are dated readings. The live price is shown next to each product.
