Skip to content

Wet and dry · fine grits

auriikoop Wet and dry sheets, 230 × 90 mm, 72 sheets

Nine grits, none of them coarse. This is the box you open after the sander has finished, not instead of it.

Assorted wet and dry sandpaper sheets, product photograph

auriikoop Wet and dry sheets, 230 × 90 mm, 72 sheets

Nine grits, none of them coarse. This is the box you open after the sander has finished, not instead of it.

Sheet size
230 × 90 mm (9.06 × 3.54 in)
Grits
P400, P600, P800, P1000, P1200, P1500, P2000, P2500, P3000
Quantity
72 — eight of each grit
Abrasive
Silicon carbide, electroplated
Use
Wet or dry
Part number
2023053_1
Availability
No EAN published — other markets could not be verified
Amazon reference
B0CC1QG9D3
  • Nine grits with no gaps between them, eight sheets of each
  • The grit is marked on the back of every sheet, which sounds trivial until you have a bench full of them
  • P400 is the coarsest sheet — this set removes nothing

Best for: Cutting back between coats of finish, and de-nibbing a varnished surface

≈ $9
Search Amazon for this model

Specifications

Sheet size
230 × 90 mm (9.06 × 3.54 in)
Grits
P400, P600, P800, P1000, P1200, P1500, P2000, P2500, P3000
Quantity
72 — eight of each grit
Abrasive
Silicon carbide, electroplated
Use
Wet or dry
Part number
2023053_1
Availability
No EAN published — other markets could not be verified
Amazon reference
B0CC1QG9D3

Every figure below is a manufacturer specification read off the listing itself. The judgments are ours.

What the specification says

Seventy-two sheets of 230 × 90 mm (9.06 × 3.54 in) electroplated silicon carbide paper, eight each of P400, P600, P800, P1000, P1200, P1500, P2000, P2500 and P3000, usable wet or dry, grit marked on the back.

Read the grit range before buying

This turned up under a search for a general sandpaper assortment, and it is not one. There is nothing here below P400, so it cannot flatten a surface, level a joint or take off a machining mark. Everything it does happens after the belt sander and usually after the first coat of finish.

Sheets and blocks

At 230 × 90 mm (9.06 × 3.54 in) a sheet tears neatly into pieces that wrap a cork block or fold into three for hand use. Folding in three matters: two abrasive faces rubbing together destroy each other, and a three-fold keeps every face against something soft.

Availability

Read on the day this page was built: $9 at the American Amazon shop.

Read from Keepa on the day this page was last revised; stock and price both move without notice.

Prices quoted in this text were read on 2026-08-12. The live price is at the top of the page.

What comes up most often

What is wet sanding for on wood?

Almost always for the finish rather than the timber. Water or white spirit floats the swarf away instead of letting it clog the paper, which is what lets very fine grits keep cutting. On bare wood, water raises the grain; on a cured varnish or oil film, it is how you get a surface flat before the next coat.

Do I need anything above P1000 on wood?

On the timber itself, no — the grain closes and further sanding only polishes the surface so it takes stain unevenly. On a finish, yes: the very fine end of this set is for cutting back lacquer and for bringing an oiled surface to a sheen. Which is why the pack starting at P400 is a statement about what it is for.

More abrasives

  • Mirka Abranet Ace HD mesh sanding discs, product photograph

    Mirka Abranet Ace HD, Ø 125 mm, P40

    A mesh disc extracts through its whole surface rather than through eight holes — which is why it lasts several times longer.

    Diameter
    125 mm (4.92 in)
    Grit
    P40
    Construction
    Open mesh, hook and loop
    Part number
    AH23202540
    Amazon reference
    B082FTHFR3 (identical on 6 markets)
    EAN
    6416868271607
    • Mesh extracts over the whole disc face, not through punched holes
    • Does not clog on resinous softwood, which is where paper discs die
    • Costs several times what a paper disc costs

    Best for: Sanding resinous or filled surfaces where paper discs clog within minutes

    Check price on Amazon
  • Peachtree 5 inch non-woven abrasive pads in four colors, product photograph

    Peachtree Woodworking Supply 21904 non-woven pads, 5 in, 16 pack

    Four grades told apart by color rather than by a printed number — and one of the four is non-abrasive by the listing's own account.

    Diameter
    5 in
    Quantity
    16 pads · The split between the four grades is not published
    Grades
    Four, by color: green stated like 240 grit, maroon stated 320, grey stated 800 very fine, and white stated non-abrasive — the only color-coded grading on this shelf
    Backing
    Hook and loop, for a 5 in random orbital sander or polisher
    Construction
    Non-woven
    Named uses
    Paint removal, scuff sanding between coats, smoothing before a final finish, buffing, applying oils and waxes · Also rust removal, deburring, metal cleaning and auto paint prep
    Water
    The white pad is stated to stand up to water, cleaners and wood finishes
    Part number
    21904
    Amazon reference
    B0FB46JFX6
    EAN
    0817918025045
    • Four grades in one purchase, each with a stated grit equivalent
    • Color-coded, so a pad on the bench is identifiable at a glance
    • Sixteen pads across four grades, and the split between them is not published

    Best for: Scuff sanding between coats of finish on a 5 in random orbital, and buffing the last one

    ≈ $27
    Check price on Amazon
  • Peachtree abrasive cleaning sticks, two-pack, product photograph

    Peachtree Woodworking Supply BCS cleaning stick, 2 × 2 × 12 in, 2 pack

    The largest cleaning stick on this shelf — forty-eight cubic inches of rubber each — from a listing that mentions skateboards four times.

    Quantity
    2 sticks
    Stick size
    2 × 2 × 12 in, published — about 48 cubic inches of rubber per stick, the largest section on this shelf
    Material
    Natural rubber
    Removes
    Residue and debris, stated to restore belts and abrasive materials to like-new condition · No residue type is named
    Method
    Pressed against the running belt, or rubbed by hand, per the maker
    Named uses
    Sanding belts, disc sanders, drum sanders, skateboard grip tape, grip tape on floor areas
    Not for
    Not published by the maker.
    Part number
    BCS
    Amazon reference
    B0DPJ4QDFN
    EAN
    0817918024895
    • The largest stick on this shelf — forty-eight cubic inches against nineteen
    • More rubber per dollar than the POWERTEC pair, on the published dimensions
    • Publishes no exclusions, where the POWERTEC listings publish three

    Best for: A wide belt sander, where a two-inch square section stays square against the belt

    ≈ $21
    Check price on Amazon

Elsewhere in the workroom

  • Bayerwald Uddeholm band saw blade, product photograph

    Bayerwald Werkzeuge Uddeholm 1,712 × 12 × 0,4 mm, 4 TPI

    Swedish steel, welded in Germany, in one fixed length — a coarse pitch for softwood and a thin band that tensions easily.

    Length
    1,712 mm (67.4 in)
    Width
    12 mm (0.47 in)
    Thickness
    0.4 mm (0.02 in)
    Pitch
    4 teeth per inch
    Tooth spacing
    6 mm (0.24 in)
    Steel
    Uddeholm, welded in Germany
    Part number
    120-23335
    Amazon reference
    B0FXH8MJNJ (identical on 6 markets)
    EAN
    4251128766385
    • Uddeholm steel with a machine-set tooth and a professionally finished weld
    • Supplied welded and ready to fit
    • The manufacturer itself asks you to check the dimensions against your saw

    Best for: Softwood, spruce, pine and MDF on a saw that takes a 1,712 mm (67.4 in) band

    Check price on Amazon
  • Set of three wood band saw blades, product photograph

    SMI Swiss Made Industries GmbH 2,360 × 13 × 0,65 mm, 6 TPI, set of 3

    A three-blade pack in one specific length: everything about this purchase turns on whether your saw measures 2,360 mm (92.9 in).

    Length
    2,360 mm (92.9 in)
    Width
    13 mm (0.51 in)
    Thickness
    0.65 mm (0.03 in)
    Pitch
    6 teeth per inch
    Tooth form
    Standard set
    Quantity
    3
    Intended machine
    Scheppach Basato 3 Vario
    Amazon reference
    B0847MDQ1Q
    EAN
    4251402810384
    • Three blades in a pack, which matches how fast they are consumed
    • 6 TPI at 13 mm (0.51 in) wide is a sensible general-purpose combination
    • German listing only — not sold in Britain, France, Italy, Spain or the United States

    Best for: A Scheppach Basato 3 Vario, or any saw whose plate reads 2,360 mm (92.9 in)

    Search Amazon for this model
  • Bayerwald 254 mm 24-tooth circular saw blade, product photograph

    Bayerwald Werkzeuge 254 × 30, 24T ATB

    The other half of a two-blade table saw kit: 24 teeth, fast, and it will not burn in a deep rip.

    Diameter
    254 mm (10 in)
    Bore
    30 mm (1.18 in)
    Kerf
    2.8 mm (0.11 in)
    Teeth
    24, alternate top bevel
    Part number
    111-42023
    Amazon reference
    B07PNQRDMF (identical on 5 markets)
    EAN
    4251128703694
    • 24 teeth clears the chip in a deep rip, where a fine blade burns
    • Sold across five European markets on one reference
    • Leaves a coarse edge that will need planing or sanding

    Best for: Ripping solid timber on a table saw, and cutting firewood

    Search Amazon for this model

All abrasives