Scroll · 59-1/2 in · pair
POWERTEC 13100-P2, 59-1/2 in × 1/8 in, 14 TPI, 2 pack
The narrowest and finest band on this shelf, sold in twos — which is honest about how fast a 1/8 inch blade goes.
Specifications
- Length
- 59-1/2 in, published — 1,511 mm (59.5 in)
- Width
- 1/8 in — 3.2 mm, the narrowest band on this shelf
- Thickness
- 0.025 in, published — 0.635 mm (0.03 in)
- Pitch
- 14 TPI — the finest pitch on this shelf
- Tooth form
- Stated a racer set / regular teeth profile, in those words
- Steel
- High grade carbon steel, stated flexible with a hard edge, with a heat-resistant weld
- Quantity
- 2 blades
- Intended machine
- 9 in saws taking a 59-1/2 in band — WEN 3959, Sears Craftsman, Porter-Cable, Ryobi, Delta, Black & Decker and Skil are named
- Part number
- 13100-P2
- Amazon reference
- B0BN3YXDXN
- EAN
- 0843441120940
Every figure below names its source. Each one is a manufacturer
specification read off the listing itself. The judgments are ours.
An eighth of an inch
The narrowest band on this shelf, and the only one on the American half sold by
the pair.
It will follow a radius of about 5 mm (0.20 in). The rule of thumb runs with roughly the
square of the width: a quarter inch turns about 15 mm (0.59 in), three eighths about 40, a
half inch about 65.
So this is the band you fit when the pattern has a corner in it.
Everything else it cannot do. It will not rip straight, it will not resaw, and
it wanders under any side pressure.
Two of them, and that is the honest quantity
A 1/8 inch band is broken, not worn out.
It is narrow enough that a twist in the cut kinks it, and a kinked band is
finished. The published 6 mm (0.24 in) narrow pack on this shelf is sold in fives and its
page says the same thing in the same words: five blades, which matches how fast
narrow blades are consumed.
Two is the smaller version of that admission.
Fourteen teeth to the inch
The finest pitch on this shelf — and a working limit of about 20 mm (0.79 in) of stock.
The gullet between two teeth carries the sawdust from the top of the cut to the
bottom. At 14 TPI the gullets are tiny, so in deep stock they fill before they
clear, and a band carrying packed dust stops cutting and starts heating.
About three teeth in the cut is the rule. Past 20 mm (0.79 in), the coarse blades in this
maker’s assortments here are the answer.
Racer set
The listing’s words, and not a tooth form this page can place.
The three standard sets are raker, alternate and wavy. Raker leaves every third
tooth unset and is the usual choice for a fine general-purpose band, which is
almost certainly what is meant.
The AYAO blade on this shelf names a raker set. The Timber Wolf names an
alternate set. This one names something in between the two words.
Availability
Read on the day this page was built: $17 at the American Amazon shop.
Read from Keepa on the day this page was last revised; stock and price both move without notice.
Prices quoted in this text were read on 2026-10-07. The live price is at the top of the page.
