Hand planer · TCT · 2 blades
FOXBC 82 × 29 × 3 mm TCT, pair
A thicker, wider 82 mm (3.23 in) blade than the rest of this shelf — and the longest machine list on it.
Specifications
- Length
- 82 mm (3.23 in) — 3-1/4 in
- Width
- 29 mm (1.14 in) · Five times the 5.5 mm (0.22 in) of the other 82 mm (3.23 in) blades on this shelf
- Thickness
- 3 mm (0.12 in) · Two and a half times the 1.2 mm (0.05 in) of the other 82 mm (3.23 in) blades here
- Material
- TCT tungsten carbide
- Claims
- Stated to last up to 30 per cent longer and to be 10 per cent sharper than standard tungsten carbide blades · The HZ blades on this shelf publish the same two percentages, word for word
- Quantity
- 2 blades, in a plastic case
- Fits
- Fourteen machines named: Makita 1900B, N1900B, KP0800K, KP0810, 1100, 1902, 1923B, 1923H, KP0800, XPK01Z and XPK02Z; DeWalt D26676, DW6655, DW677, 678 and 680K; Bosch 1594 and PA1205; and Ryobi — the longest fitment list on either half of this shelf
- Part number
- FOXBC-3 1/4
- Amazon reference
- B07H49849M
- EAN
- 6971007720809
Every figure below names its source. Each one is a manufacturer
specification read off the listing itself. The judgments are ours.
Twenty-nine millimeters, and three
Against five and a half, and one point two, on the other 82 mm (3.23 in) blades on this
shelf.
Those are not variants of one part. They are two different kinds of head.
One takes a thin reversible shim clamped against a bar — 5.5 by 1.2 — which is
what the HZ blades and the published HSS set here are. The other takes a solid
blade bolted into a slot and set with a gauge — 29 by 3 — which is this.
They share the 82 mm (3.23 in) length and nothing else, and 82 mm (3.23 in) is the dimension that
does not decide fitment.
Which is why the fourteen names matter
Makita 1900B, N1900B, KP0800K, KP0810, 1100, 1902, 1923B, 1923H, KP0800, XPK01Z,
XPK02Z. DeWalt D26676, DW6655, DW677, 678, 680K. Bosch 1594, PA1205. Ryobi.
No other listing on either half of this shelf approaches that.
If a planer is on the list, the solid blade is the right kind. If it is not, the
5.5 by 1.2 blades on this shelf are the other candidate — and neither listing
tells a reader that two kinds exist.
Solid, or shim
A 3 mm (0.12 in) carbide blade has enough body to be reground on a surface grinder. A
1.2 mm (0.05 in) shim is thrown away.
It is also stiffer, so it deflects less in a deep cut.
What the shim gives instead is a reversible double edge and a price low enough to
change it early. The HZ ten-pack on this shelf is twenty edges.
Solid blades are the older arrangement, and the one a tradesman fitting doors all
week will want.
Thirty per cent, and ten per cent, again
The same two unattributed figures as the HZ blades on this shelf, in the same
words.
Two brands, one sentence, no named standard and no method.
Printed here as what it is: shared copy. The three dimensions on this page can be
checked against a head; these two numbers cannot be checked against anything.
Availability
Read on the day this page was built: $10 at the American Amazon shop.
Read from Keepa on the day this page was last revised; stock and price both move without notice.
Prices quoted in this text were read on 2026-10-07. The live price is at the top of the page.
