Holding the work · review
Thirty pounds, a published surface size and a published height — and a table rating two thirds of the Pony beside it.
The end of it Five published figures and a system that extends — at two thirds the table rating of its neighbor.
Every figure below names its source. Each one is a manufacturer specification read off the listing itself. The judgments are ours.
Surface size, 31 by 25 inches. Working height, 32. Weight, 30 pounds. Table rating, 300 pounds. Sawhorse rating, 1,000.
On this shelf that is remarkable. The published Bosch PWB 600 page here has cons that read: no part number, no dimensions, no working height, no load rating. The published Sjöbergs Nordic 1450: no dimensions, no top thickness and no vice detail.
Five figures is enough to decide whether a bench fits a car, a garage and a job — which is the whole question for a folding bench.
Thirteen and a half kilograms, which is a one-handed carry.
And it is the problem as well as the point. The published Black & Decker Workmate page on this shelf names it: light — it will move under a hand plane.
A folding bench is a support, not a mass. What it holds, it holds with clamps.
Pegasus, Sidekick, Clamping Sawhorse — all at the same height, with the same connectors.
Which is how a 787 mm (31 in) surface supports a door: two tables make a meter and a half, three make a bench longer than most workshops have wall for.
What that means is that the first purchase commits to one maker’s height, and thirty-two inches is it.
A bench is judged on three things and only one of them is usually published.
Mass is what stops the bench moving when a plane is pushed along a board. Rigidity is what stops the top flexing under a mallet. Racking is the sideways parallelogram collapse that every four-legged frame wants to do, and it is resisted by stretchers and by the top being bolted down rather than resting.
A load rating is not any of the three — it says what the bench will hold standing still. The published Bosch PWB 600 page on this shelf names the figure that actually matters and its absence: no clamping capacity, which is a bench’s only real specification.
The Pony bench on this shelf publishes 500 as a table and 1,000 as a sawhorse. This publishes 300 and 1,000.
Same architecture, same path down the legs for the sawhorse load, and a table rating two thirds lower — which points at the jaws and the frame rather than the legs.
A hundred and thirty-six kilograms is a sheet of MDF and a toolbox, which covers most folding-bench work.
The Pony supplies four, and two safety straps, and four bench dogs.
This publishes none, and a clamping workbench without clamps holds what friction holds — which is the exact objection the published Sjöbergs Smart Workstation page carries: clamps to fix it down are not included, and it does nothing without them.
Read on the day this page was built: $160 at the American Amazon shop.
Read from Keepa on the day this page was last revised; stock and price both move without notice.
Prices quoted in this text were read on 2026-10-07. The live price is at the top of the page.
| Type | Two-in-one: a workbench and a sawhorse, switchable |
|---|---|
| Load rating | 300 lb as a workbench and 1,000 lb as a sawhorse — 136 and 454 kg (1000.9 lb), both published · The Pony bench on this shelf publishes 500 and 1,000 |
| Surface size | 31 × 25 in — 787 × 635 mm (31 × 25 in), published |
| Working height | 32 in — 813 mm, fixed |
| Weight | 30 lb — 13.6 kg, published |
| Construction | Molded ABS plastic with steel supports and fittings |
| Expansion | Stated to connect to other tables in the maker's range — the Pegasus, the Sidekick and the Clamping Sawhorse — all at the same height with the same connectors |
| Supplied clamps | Not published by the maker. |
| Part number | WX051 |
| Amazon reference | B01HREBZ3M |
| EAN | 0845534015836 |
Unusual on this shelf. Surface size, working height, weight, table rating and sawhorse rating are all here, and the published Bosch PWB 600 page on this shelf publishes none of them — its cons read: no part number, no dimensions, no working height, no load rating. The published Sjöbergs Nordic 1450 page is in the same position: no dimensions, no top thickness and no vice detail. Five figures is enough to decide whether a bench fits a car, a garage and a job, which is the whole question for a folding bench.
Because a 787 mm (31 in) surface does not support a door. Two tables at the same height with matching connectors make a 1.5 meter (4.9 ft) surface, and three make a bench longer than most workshops have wall for — which is how a folding system solves the problem a single folding table cannot. The listing names the three products it joins to. What it means in practice is that the first purchase is a commitment to one maker's height, and 32 inches is that height.
Three hundred here, five hundred on the Pony on this shelf, and both publish 1,000 as a sawhorse. Same two-in-one architecture, same sawhorse path through the legs, and the table rating differs by two thirds — which points at the jaws and the frame rather than the legs. A hundred and thirty-six kilograms is a sheet of MDF and a toolbox, which covers most folding-bench work; two hundred and twenty-seven is a small engine. Neither is a bench in the sense the published Sjöbergs pages mean.
One person carrying a bench to the work, and adding a second table when the board is long
Amazon reports what buyers took in the month before this page was last checked: at least 2,000.
The figure is a floor, rounded by Amazon, and read through Keepa — it says what buyers picked, not what a maker claims.
Specifications: the manufacturer sheet for woodworking machines and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
Folding bench · adjustable clamping top
The folding bench that has been in every garage for fifty years — and still the cheapest way to hold work at a sensible height.
Best for: A small or shared space where the bench has to disappear between jobs
≈ $350
Wood top · metal frame · one market · no barcode
A €217 Bosch workbench with a wooden top, a metal frame, and not one published dimension, weight or capacity.
Best for: A German buyer who has seen one in person and knows what they are getting
60 in · 330 lb capacity · rubberwood in the title and acacia in the bullet · drawer and shelf
A workbench whose title says rubberwood and whose first feature says acacia — two different trees.
Best for: A garage bench with a drawer, by somebody who will ask which timber arrives
≈ $330
