Crosscuts & angles · review
A sliding dual-bevel saw for the price of a fixed single-bevel one — sold, as far as we can verify, only under a German reference.
The end of it Good value on paper and awkward to recommend across a five-country network, because we cannot confirm where it is sold.
Every figure is a manufacturer specification, read off the listing itself, and the judgments are ours — drawn from how the specification behaves in this class of machine and from what long-term owners consistently report. Where a figure is missing, we say so rather than fill it in.
Up to 1,800 W, 4,900 min⁻¹ off load, an integrated slide, a workpiece stop, and dual bevel. Einhell publishes no crosscut width and no cut height on this listing.
This listing carries no EAN. That matters more here than it would on a single-country site: without a barcode we cannot look the product up on the French, Italian, Spanish, British or American stores, so we cannot tell you whether it is sold there. The reference we hold is the German one, and readers elsewhere are sent to a local search rather than to a page that may not exist.
That is the honest position, and it is why this saw is not our recommendation despite being the cheapest sliding dual-bevel machine on the page.
Sliding and dual bevel at this price is a genuine outlier — most saws at this money are fixed-head, single-bevel, or both. Whether the execution matches the feature list is exactly what the missing figures would tell us.
Crosscut width, cut height, fence height, detent positions and availability outside Germany. If you are in Germany and the price is right, ask the seller for the first two before ordering.
| Motor | Up to 1,800 W |
|---|---|
| No-load speed | 4,900 min⁻¹ |
| Slide | Integrated slide function |
| Bevel | Dual (tilts both ways) |
| Availability | No EAN published — other markets could not be verified |
| Amazon reference | B082QHCZSC |
Flipping the workpiece. A single-bevel saw tilts one way, so cutting a matching pair of angled ends means turning the board over and re-registering it against the fence — which is where the error creeps in. On crown molding and anything with a mitre at both ends, dual bevel is the difference between a joint that closes and one that nearly does.
Because the listing publishes a motor rating, a speed and two features, and nothing else — no crosscut width, no cut height, no EAN. We report what is published and mark the rest as missing rather than borrowing figures from a similar model.
6.7/ 10
Good value on paper and awkward to recommend across a five-country network, because we cannot confirm where it is sold.
A German buyer who wants dual bevel and a slide without paying for either
Specifications: the manufacturer sheet for woodworking machines and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
18 V BITURBO · 216 mm (8.50 in) blade · dual bevel · bare tool
A cordless dual-bevel mitre saw at €430 in Germany and €599 in Spain — the widest price gap in this group as a proportion of the price.
Best for: Second-fix carpentry away from a socket, in a shop already on AMPShare
254 mm (10 in) · 90 × 305 mm (3.54 × 12 in) cut · dual bevel
The only saw here that states its capacity as a cross-section — 90 × 305 mm (3.54 × 12 in) — which is the number you actually need.
Best for: A workshop cutting wide boards and tall sections, where capacity decides what is possible
Bosch Professional · Amazon Exclusive set
A professional-line Bosch slider sold as an Amazon set — and a listing that publishes nothing you could compare it on.
Best for: A buyer already committed to Bosch Professional who knows this model
Prices quoted in these summaries are dated readings. The live price is shown next to each product.
